|
APPLICATIONS
Fast heat response,
compact design and versatility make the CWH Architectural Series
heaters ideal for dens, basements, converted attics and breezeways,
garages, bathrooms, small offices, workshops and similar areas. Also,
adaptable to multiple
installations in somewhat larger or odd shaped rooms.
FEATURES
Heating element is
heavy duty steel fins brazed to steel sheathed tubular elements
in a grid pattern that covers the
entire discharge area.
FAN DELAY: On a call
for heat, element is energized but fan is delayed until element
is warm, eliminating the circulation of cold air during start up. When
the thermostat is satisfied,
the element is de-energized, but the fan continues until all heated
air is discharged providing longer component life and higher comfort
level.
Designed for easy
installation. Heater is mounted prior to wiring. Both hands are free
to make field connections in roomy compartment.
Motor is totally
enclosed, impedance protected with permanently lubricated bearings.
Airflow system
maximizes air volume at minimum noise level; 65 CFM.
Rugged louvered
commercial grade steel Architectural grille creates downflow air
pattern.
This heater is designed
for installation in 2 x 4 or larger wall sections using the wall box
provided. The heater may also be surface mounted to the wall by using
the Surface Mounting Frame, Model No. CWHSMAG (order separately).
The heater may be wired
with standard building wire (60°C). Refer to specification chart for
correct supply voltage and wire size.
Built-in snap action
thermostat (no radio/TV interference; 40° - 85°F).
A hole plug is provided
for tamper resistant installations.
Includes Built-In
Disconnect Switch.
Statuary Bronze durable
polyester powder coat finish and aluminum frame.
|
